BEDLINER 
 

PRODUCT CHARACTERISTICS

COBRA Truck Bedliner - 2K polyurethane resin-based textured protective coat. Extreme mechanical strength, scratch and solvent resistance. Protects against adverse weather conditions, petrol, oil, water and salt. Sound-proofing and sound-dampening properties. Anti-slip finish. Black as standard; available in a pigmented version to produce any colour by adding 10-15% of an acrylic topcoat or basecoat. SPECTRAL 2K or SPECTRAL BASE recommended.

COBRA Truck Bedliner guarantees:

  1. Superior protection
  2. Stain and scratch-resistant coating finish
  3. Durability in all weather conditions: water-resistant, extreme temperatures, UV radiation and sea water
  4. ADD – SHAKE – SPRAY: fast and easy to apply
  5. Adjustable texture thickness
  6. Sound-proofing for improved driving comfort
  7. Compatibility with various substrates
  8. Impacting visual finish

TECHNICAL DATA SHEET SAFETY DATA SHEET SAFETY DATA SHEET (HARDENER)

 
 

APPLICATION

COBRA Truck Bedliner can produce various textures depending on the nozzle size and thinning proportions:

  1. Coarse texture: adjustable by spraying pressure and the nozzle-to-surface distance; requires a UBS spray gun;
  2. Medium texture: adjustable by adding thinner 0-5% and spraying with a con-ventional gun and a Ø 2,5 mm nozzle.
  3. Fine texture (perfectly imitating plastic): when adding 25-30% thinner and applied with a conventional gun, nozzle diameter 1.4-1.8 mm.

The product can also be applied with brushes and rollers. Recommendations for substrate preparation

  1. Remove all details not to be coated.
  2. Degrease with a silicone remover.
  3. Sand down with a sand grain suitable for the substrate (from P120 to P180).
  4. Blow the substrate clean of all loose particles.
  5. Degrease with a silicone remover.
  6. Mask all surfaces not to be coated (including tapped holes and fixed details) with painter's tape and paper/plastic sheets.
  7. Apply an anti-corrosive protection layer (an etching primer 2K or an epoxy primer 2K); do not apply the protective coating on bare metal.
  8. For plastics and poorly matted substrates: use an adhesion promoting agent.
  9. If the product action on the substrate is uncertain, perform a thinner test: if the coating begins to dissolve after wiping with a cloth soaked in the thinner (1K), remove the coating.
  10. With the anti-corrosive coatings cured and properly prepared (by matting, blowing off dust and degreasing according to the specifications), apply the COBRA coating according to its Technical Data Sheet.

Use:
COBRA can be applied whenever you need a durable and lasting textured protective coating witch high mechanical strength and scratch resistance. The sound-proofing and sound-dampening performance comes with the anti-slip effect of the coating texture.

 
 

EXAMPLES OF USE

AUTOMOTIVE

  1. Protection of off-road vehicle bodies
  2. Load bodies of utility and off-road vehicles
  3. Trailers for utility, off-road and tow vehicles
  4. Campers
  5. Semi-trailers
  6. Body panels, boot interior, SUV floors, and wheel pits

MOTOR BOATS

  1. Boat bodies
  2. Motor boat engines
  3. Canoes and paddles/oars

FARMING

  1. Farming machines
  2. Trailer hitches
  3. Ploughs, spreaders and seeders
  4. Scratch-resistant surfaces
  5. Silos

INDUSTRIAL

  1. Workplace floors
  2. Enclosures, forklifts, trailer interiors
  3. Anti-slip surfaces
  4. Freight wagons
  5. Forklift trucks
  6. Concrete mixers and tankers

HOME

  1. Tool boxes
  2. Fences
  3. Pots and Pavements
  4. Flower beds
  5. Wheelbarrows

 



NOVOL Sp. z o.o.
ul. Żabikowska 7/9
62-052 Komorniki
tel.: +48 61 810 98 00
email: novol@novol.pl
GPS N: 52° 20' 13" E: 16° 49' 44"